Large Vent Cover to Suit Dometic LS300 – Two-Piece Overlapping Design

Large Caravan Vent Cover – Two-Piece Overlapping Design

Give your caravan’s exterior a clean, finished look with the Custom Etch Studio Large Caravan Vent Cover. Its curved profile helps deflect wind-driven rain and road dust while leaving ventilation openings clear.

The two-piece overlapping design covers a large vent, with matching centre fixing points to secure the halves together. Internal reinforcement ribs provide additional support across the broad cover surfaces.

Made to Order Colours 

* Orange , Dark Green , Dark Brown , Light Green , Blue  and RED  - no Extra Cost for different colours , ETA will be 2 to 3 Weeks from Order

Features

• UV-rated ASA material for outdoor use in Australian conditions.

• Curved profile with rounded outer corners.

• Overlapping centre joint with matching screw holes.

• Internal reinforcement ribs for added rigidity.

• Black finish with Custom Etch Studio branding.

• Designed and manufactured in Australia.

Dimensions

The halves overlap by 10mm. Dimensions are nominal; minor manufacturing variations may occur.

Installation requirements

• A cordless drill is required.

• Pre-drilling the face of the existing vent is required where the cover’s fixing positions do not match existing holes, including the centre joining points.

• Position and align both halves before marking or drilling.

• Check clearance behind the vent before drilling and use suitable fixings for the existing frame.

• Tighten screws carefully without overtightening.

Check your existing vent’s dimensions, profile and fixing access before ordering. For vents serving an appliance, confirm the cover is suitable and maintains the appliance manufacturer’s required ventilation.